Free 3D print file · PACKOUT-compatible
Center Bins for Milwaukee® PACKOUT™ Organizers
Three bins that fill the empty center channel of the 11-compartment PACKOUT™ organizers: a front, a middle and a back, shaped to seal against the lid. One set for the standard Organizer, one for the Low-Profile.
Based on Milwaukee Packout Organizer Compatible Center Bins and Milwaukee Packout Low Profile Organizer Compatible Center Bins by SkippyMcSlappyPants (CC BY 4.0). We turned them to print floor-down and debossed modmypack.com into each floor; the bins are theirs, unchanged. These files are shared under CC BY 4.0 too: share, change or sell them, crediting SkippyMcSlappyPants and modmypack.
View bin set detailsWatch it work
What you need
Nothing to buy: just print. Everything here is optional.
Don’t have a 3D printer?
Have it printed for you
Download the file, then upload it to Craftcloud. It compares prices from print shops and ships the parts to you. Ask for PETG or PLA, as in the print settings.
Get it printed on CraftcloudWant a ready-made set from me?
I’m thinking about printing and shipping ready-made sets. Join the list and I’ll email you if I do. No commitment.
Print settings
- Material
- PETG or PLA
- Layer height
- 0.2 mm
- Infill
- 15%, 3 walls
- Supports
- None
Print each bin as it comes, floor down. We turned the original files over for this: as first published they load standing on end and need supports. PETG if the organizer rides in a hot truck.
Install
Step 1
Print the set for your organizer
Three bins per organizer: the Organizer set is 76 mm tall, the Low-Profile set 46 mm. Each prints floor down with no supports.
Step 2
Drop them into the center channel
Front bin at the front, back bin at the back, middle between them. The front and back rims are cut to seal against the lid, so they only fit one way round; the middle bin fits either way.
Step 3
Close the lid
The lid closes over the rims and seals each bin, so small parts stay put when the organizer is carried or tipped.
Questions before you build
Which organizers do they fit?
The 11-compartment PACKOUT™ organizers, which have the open center channel: the standard Organizer (48-22-8430) and the Low-Profile Organizer (48-22-8431). Print the set that matches yours; the download has both.
Do they line up with the organizer's other bins?
Not exactly: all three are the same length, so their joints don't match the side bins' spacing. The original designer, SkippyMcSlappyPants, sells five more center bins in other lengths on Printables ("More Milwaukee Packout Organizer Compatible Center Bins", model 1092870), so you can mix them to line up; the link is in the download's README.
Who designed them?
SkippyMcSlappyPants, who shared both sets under CC BY, so these files are CC BY 4.0 too: you can share, change or sell them, crediting SkippyMcSlappyPants and modmypack. We turned them to print floor-down and added the debossed modmypack.com.
Is it really free?
Yes. Sign in once with your email or Google and every design is a free download.